Tools -> Transfer -> Configure Normal/Slave Mode (0BA7 only)

You can use this menu command to switch a LOGO! Base Module between normal mode and slave mode, and make configurations accordingly.

The Configure Normal/Slave Mode dialog is shown as follow:

You can manually input the destination IP address of the LOGO! Base Module or use the "Select" button for an available IP address.

When select "Slave Mode", you must input your master IP:

Note

The LOGO! Base Module will restart automatically to apply following configurations you made with LOGO!Soft Comfort:

  • Mode switching (from normal mode to slave mode or vice versa)

  • A change to the master IP in the slave mode